Designed to bond surfaces exposed to high heat. For quick emergency-type repairs like mufflers, engine blacks, grills, stoves, steam pipes and more. Cut, mix and apply. Allows a working time of about 8 minutes and cures for service in 60 minutes. Designed for elevated temperatures up to 500-degrees fahrenheit. Apply to clean and dry surfaces. Waterproof. Fast-setting. No sag. No Drip. Hand moldable. Can be sanded, drilled, sawed, and painted after thirty minutes.

For emergency automotive and plumbing repairs of gas tanks, radiators, holes or dents. Use on drums, steel doors, tanks, pipes, wherever metal is missing, dented or broken. Hand mixed with 3 minute working time. Cures in 30-60 minutes. May be sanded, drilled, sawed and painted after set. Nonconductive with -20 to 300 degrees Fahrenheit (-29 to 150 degrees Celsius) temperature range when cured. No sag, no drip. Resistant to hydrocarbons, ketones, alcohols, esters, aqueous salt solutions, halocarbons, and dilute acids and bases. 900 psi tensile shear strength. 75-85 hardness shore D after 1 week of curing. Packed in resealable, air-tight plastic cylinder.

Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; use as a sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minutes tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas, fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.

Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.

Use as an adhesive with woods, metals, glass, brick, block, rubber, concrete, stone, slate, hard plastic, fiberglass or tile; sealant on oil, gas and water tanks, cellar, pressure tanks or plumbing; use as a filler for holes, castings, patterns, molds, voids, welds, steering wheels and more. Normally no vise or clamp is needed. 60 minutes max working time at 70 degrees Fahrenheit. 160 minute tack free, overnight for service, 1-2 weeks for max cure time. Chemical resistance to mild acids, caustics, detergents, gas fuel oil, salt and fresh water. Nonconductive, -20 to 200 degrees (-29 to 93 degrees Celsius) temperature range. 2,150 psi tensile shear strength. 76 hardness shore D after 1 week of curing.